Skip to content

2101 E US Hwy 80, White Oak, TX

903-353-0920
Epic Sheetmetal

Catalog

Products

Weather-tight dish mounts and architectural metal. Call with the pitch, the length, and the part code when you have one.

Shop work

Custom fabrication

When the roof does not match a stock break, the shop forms the piece. Counterflashing, wall transitions, chimney surrounds, and odd lengths are everyday work. Bring a sketch, a photo, and the pitch.

  • One-off flashings
  • Pitch transitions
  • Panels and clips
  • Match an existing hem
Custom counterflashing formed into a shingle roof
Epic Sheetmetal

Custom trim

Trim profiles

Ridge, rake, valley, drip edge, sidewall, and siding clips. Dimensions below are inches. An asterisk means confirm the pitch or the companion part when you order. Codes marked X take a size from the table. Maximum trim length is 10 feet.

  • RR8b

    8" universal ridge cap

    180° pitch-to-pitch, 1" open hem. Specify roof pitch. Use with Z bar.

  • ZB

    Z bar

    ZB1 1", ZB1121 1½", ZB134 1¾", ZB2 2". Pre-cut lengths available as ZBARPC.

  • RCF

    Residential rake

    RCF2, RCF1.5, RCF3, and RCF4. 1" seam height, 1" open hem, ½" closed hem, 135°. Use with the rake receiver.

  • RAKEREC

    Rake receiver

    Painted side out, ½" closed hem. Pairs with the residential rake.

  • RRT3

    Residential rake 1"

    4" legs, 1" open hem, ½" closed hem. Use with Z bar.

  • RCF

    Sculptured rake

    8" profile with 112° and 135° breaks, 1" open hem, ½" closed hem. Use with Z bar.

  • VF

    Valley flashing

    VF3 at 1" seam height and VF3b at 2". 135° to the pitch, 90° break. Use with a cleat. Specify roof pitch.

  • CLEAT

    Cleat / valley strips

    1" and ½" legs, 45° and 135°, painted side noted on the sheet.

  • VF

    Valley flashing with cleat

    VF4 at 1" seam height and V43b at 2". 90° and 135° breaks. Specify roof pitch.

  • SWT3

    Sidewall transition

    4" and 5" legs, 90° plus pitch, 1" open hem. Specify roof pitch or 90°.

  • TF3

    Transition flashing

    8" × 8", 1" open hem. Specify both roof pitches. Use with Z bar.

  • DLME1

    Drip edge

    4" face, 135° break, ½" closed hem. Specify roof pitch.

  • SPC

    Siding panel clip

    1" legs with a ¾" open hem.

Dishes and antennas

Flashings and dish brackets

Weather-tight covers and brackets for satellite dishes and off-air antennas, including CommDeck-style enclosures. The brochure is the product reference for new roofs and for houses that already have equipment on them.

  • Powder-coated steel enclosures so a dish can be added, changed, or removed later.
  • Used on new construction and on existing roofs when the owner wants the penetration controlled.
  • L-style strut clip kits for brackets that need extra support, plus the DeckAdapter notes in the brochure for off-air antennas.
Download flashing brochure
Brochure page showing CommDeck-style dish enclosures on shingle roofsBrochure page covering dish mounting hardware and roof protection

Architectural metal

Cupolas, caps, and flashing

Copper bay window cap with short standing seam panels

Short-run standing seam

Standing seam panels up to 10 feet, formed in the shop for bay windows, dormers, porch roofs, and other small spans. Available in copper or painted steel. We don't run full-length roof panels.

Copper cupola with a horse weathervane

Cupolas and finials

Built in copper or 26-gauge metal, with a choice of colors. Most are louvered. Windowed cupolas are available. The finial and the roof color are matched to the house.

French-style chimney cap

Chimney caps

French slope, chase, and custom covers. A cap sheds water, blocks animals and nesting, and cuts wind downdraft. Mesh can be added as a spark screen.

Dish flashing enclosure on a shingle roof

Custom flashing

Chimney, wall, step, counter, and dish-bracket flashings bent in-house to fit the job. Made in 26-gauge or 24-gauge metal in your choice of colors, so they match the roof and keep water out.

See finished pieces in the gallery.

Need metal formed?

903-353-0920·2101 E US Hwy 80, White Oak, TX 75693